Kioti DK90, Руководство пользователя

Страница: 128 / 140

7
-2 DK90
7. With all implements lowered to the
ground, coat any exposed hydraulic
cylinder piston rods with grease.
8. Remove the battery from the tractor.
Store the battery following the bat-
tery storage procedures. (See "Bat-
tery condition" in 100 hours in peri-
odic service section.)
9. Keep the tractor in a dry place where
the tractor is sheltered from rain.
Cover the tractor.
If you intend to store your tractor for an
extended period of time, follow the pro-
cedures outlined below. These proce-
dures will insure that the tractor is ready
to operate with minimum preparation
when it is removed from storage.
1. Check the bolts and nuts for loose-
ness, and tighten if necessary.
2. Apply grease to tractor areas where
bare metal will rust also to pivot
areas.
3. Detach the weights from the tractor
body.
4. Inflate the tires to a pressure a little
higher than usual.
5. Change the engine oil and run the
engine to circulate oil throughout the
engine parts all for about 5 minutes.
6. Use the clutch locking pin to keep
the clutch disengaged. If the clutch
is left engaged for a long period of
time, the clutch plate may rust, mak-
ing clutch disengagement impossible
at the next operation.
STORAGE
(1) Clutch Pedal (2) Interlock
To avoid personal injury:
Do not clean the machine with
engine running.
To avoid the danger of exhaust
fume poisoning, do not operate
the engine in a closed building
without proper ventilation.
When storing, remove the key
from the key switch to avoid un-
authorized persons from operat-
ing the tractor and getting injur-
ed.
!!!!!
CAUTION
S43O701A
(A) Push (B) Lock