manualshive.com logo in svg

Kioti DK90, Руководство пользователя, Страница: 54 / 140

Поделиться
Скачать
Kioti DK90 Скачать руководство пользователя страница 54

4

-21

DESCRIPTION OF OPERATING SYSTEM

WARNING

!!!!!

EXTERNAL FEATURES OF
THE CAB

(1) Working Lamp(Front/Rear)    (3) Wiper
(2) Rear View Mirror

1. The cap is designed for comfort and

convenience.

2. It provides you with a wide-angle

view, external rear view mirrors and
wind-shield wipers in case of rain.

3. It is possible for you to work com-

fortably using air conditioning and
heating system.

4. With doors on both sides, entry on

either side is possible.

REAR WINDOW

(1) Handle Of Rear Window
(2) Button

If you lightly push rear window while
depressing the button on the handle,
the rear window will automatically open.

Sometimes, it is impossible for
you to open and close the win-
dow because of some attachme-
nts, please make sure of the po-
sition of the attachment when
opening and closing it.
Do not drive the tractor at full
speed or on the road with sharp
curves with the window open.

ENTRANCE

(1) Button

(2) Handle

Pressing the button of the handle will
open the door.

The cab can be locked and unlocked
by inserting the key into the lock and
turning.

S43O449A

S43O450A

S43O451A

Содержание DK90













































































































































Отзывы:

Нет отзывов