Kioti DK6010 Скачать руководство пользователя страница 230

Страница: 230 / 242

DK6010

cause

countermeasures

1. When engine is difficult to start • Fuel is thick and doesn’t flow.

• Check the fuel tank and fuel filter.

• Remove water, dirt and other impurities.

• As all fuel will be filtered by the filter, if there should be water

or other foreign matters on the filter, replace the filter.

• Air or water mixed in fuel sys

tem.

• If air is in the fuel filter or injection lines, the fuel pump will

not work properly.

• To obtain proper fuel injection pressure, unscrew the fuel

cap nut and inspect the system.

• Loosen air vent screw over fuel filter and fuel injection pump

to eliminate all the air in the fuel system.

•

Thick carbon deposits on orifice

of injection nozzle.

• This is caused when water or dirt is mixed in the fuel. Clean

the injection nozzle and check the fuel filler hole for damage.

• Check to see if nozzle is working properly or not, if not,

install a new nozzle.

• Valve clearance is wrong

• Contact your

KIOTI

dealer.

• Engine oil become thick in

cold weather and engine

cranks slow.

• Change grade of oil according to the weather (Temperature).

This troubleshooting chart summarizes simple service items for users who are familiar with mechanical systems.
For more detailed service items, contact your local

KIOTI

Dealer.

ENGINE TROUBLESHOOTING

TD210-EEC인증용-DK6010H,DK6010C,DK62 2

2018-04-20 오후 1:30:39

Содержание DK6010



















































































































































































































































Результаты поиска

Содержание DK6010

Отзывы:

Похожие инструкции для DK6010

Бренды по названию

Популярные бренды

Kioti DK6010, Руководство пользователя

Результаты поиска

Содержание DK6010

Отзывы:

Похожие инструкции для DK6010

Бренды по названию

Популярные бренды