Kioti DK6010, Руководство пользователя

Страница: 205 / 242

57
7
-
2
maintenance
6. front distance should be 2 ~ 8 mm
(0,079 ~ 0,315 in.) less than rear
distance. if not, adjust the length
of the tie rod joint.
td2O728A
check to ensure the radiator hoses
are free from damage and are tight-
ened properly every 200 hours or ev-
ery 6 months, whichever comes first.
1. if the hose clamps are loose or wa-
ter leaks from hose, tighten clamps
securely.
2. if the radiator hose is swollen,
hardened, cracked or damaged, it
should be replaced immediately.
also, it should be replaced every 2
years.
(1) clamp (2) radiator hose
ChECkING RADIATOR hOsE AND ClAMP (z)
take the following actions in the
event the coolant temperature reach-
es the boiling point, what is called
"over-heating".
1. stop the machine in a safe place
and keep the engine unloaded
idling.
2. after 5 minutes of unloaded idling,
shut the engine down.
3. keep yourself away from the trac-
tor for another 10 minutes or until
steam has stopped blowing out of
the engine.
4. make sure that there is no danger
and repair the cause of the over-
heating according to the manual’s
instruction. (refer to the instruction
in chapter. troubleshooting before
starting the engine.)
TD210-EEC인증용-DK6010H,DK6010C,DK629 29 2018-12-27 오전 10:30:46