Kioti DK6010, Руководство пользователя

Страница: 193 / 242

57
7
-
17
maintenance
8. run the start motor for approx.
10 seconds to distribute oil to
each part of the engine.
9. run the engine for approx. 5 min-
utes and check for proper opera-
tion through the engine oil warning
lamp. then, stop the engine. (it is
normal that the oil warning lamp is
off while the engine running)
10. check the engine oil level again
with the oil dipstick. if the level is
low, add more oil.
NOTE
the engine oil filter should be
replaced when changing the en-
gine oil.
•
IMPORTANT
Use only specified engine oil
and kIOTI genuine filter to
insure smooth operation and
durability of the engine.
•
WARNING
The engine oil is very hot while
the engine is running or right
after the engine is stopped. Be
careful not to be burnt.
Avoid oil contact while chang-
ing or adding engine oil and
wear eye protection to prevent
eye contact.
Prolonged and repeated con-
tact with the engine oil may
cause skin disorders and
skin cancer. If skin contact is
made, wash thoroughly with
soap or hand cleaner as soon
as possible.
keep the used oil out of reach
of children.
•
•
•
•
CAUTION
To avoid injury:
Be sure to stop the engine
before changing the fluid or re -
placing the filter.
Check the engine oil level be-
fore every operation of the
tractor. If the engine oil is insuf-
ficient, the engine can be dam -
aged, and this is not covered
by warranty. Be sure to add
the engine oil when its level is
below the lower limit of the oil
dipstick.
Do not dispose of used oil and
oil filter into drainage and other
places not designated by regu-
lations. Observe applicable reg-
ulations when disposing used
oil and filters.
•
•
•
TD210-EEC인증용-DK6010H,DK6010C,DK617 17 2018-12-27 오전 10:30:35