manualshive.com logo in svg

Kioti DK55, Руководство пользователя

Поделиться
Скачать
Kioti DK55 Скачать руководство пользователя страница 12

1-4   DK55

069O106A

069O105A

18. Do not modify or alter or permit any-

one else to modify or alter the trac-
tor or any of its components or any
tractor function without first consult-
ing a KIOTI dealer.

19. Before starting the engine, sit in the

seat, disengage the clutch, and place
shift levers in the neutral position.
Fasten seat belt if equipped with
ROPS.

20. For your safety ROPS with a seat

belt is recommended by KIOTI for
most applications.

Check operator’s manual and discus

your local dealer.

NOTE

Always use seat belt when the trac-
tor is equipped with a ROPS. Never
use the seat belt when tractor is not
equipped with a ROPS.
(ROPS: Roll Over Protective Structures)

Never modify structural members of
ROPS by welding, grinding or cutting as
this may weaken the Structure. If any
component is damaged, replace it.

Do not attempt repairs. If  ROPS is loos-
ened or removed for any reason, make
certain all parts are fitted in position.
Tighten mounting bolts to proper torque,
see ROPS installation instruction.

Содержание DK55








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды