Kioti DK4810, Руководство пользователя, Страница: 170 / 202

7
-
2
Dk4810(h,hs) / Dk5310(h,hs) / Dk5810(h,hs)
6. front distance should be 2 ~ 8 mm
(0.079 ~ 0.315 in.) less than rear
distance. if not, adjust the length
of the tie rod joint.
td2O728A
check to ensure the radiator hoses
are free from damage and are tight-
ened properly every 200 hours or ev-
ery 6 months, whichever comes first.
1. if the hose clamps are loose or wa-
ter leaks from hose, tighten clamps
securely.
2. if the radiator hose is swollen,
hardened, cracked or damaged, it
should be replaced immediately.
also, it should be replaced every 2
years.
(1) clamp (2) radiator hose
CHECKINg RADIATOR HOSE AND CLAMP (Z)
take the following actions in the
event the coolant temperature reach-
es the boiling point, what is called
"over-heating".
1. stop the machine in a safe place
and keep the engine unloaded
idling.
2. after 5 minutes of unloaded idling,
shut the engine down.
3. keep yourself away from the trac-
tor for another 10 minutes or until
steam has stopped blowing out of
the engine.
4. make sure that there is no danger
and repair the cause of the over-
heating according to the manual’s
instruction. (refer to the instruction
in chapter. troubleshooting before
starting the engine.)
TD210-호주향-DK4810,5310,5810(HS)-028 28 2018-09-07 오전 10:37:53