Kioti DK4810 Скачать руководство пользователя страница 113

Страница: 113 / 202

opERATIoN

CAUTION

To avoid accidents:

fix the mounting bolts firmly

and secure the frame with the

knock bolt.

•

HOW TO RAISE THE ROPS TO UPRIGHT POSITION

1. Unscrew the mounting bolts.
2. Set the

ROPS

in the upright posi-

tion.

3. Align the bolt holes and fit the

mounting bolts to them.

4. Tighten the knock bolt and fix it

with the nut.

td2O514a

(1) Mounting Bolt

ImPORTANT

ROPS (Roll Over Protective

Structure), sun canopy or

cabin are not a fOPS (falling

Object Protective Structure).

It never can protect the riders

against falling objects. Avoid

driving the vehicle into a dan-

gerous area such as falling

rocks zone. Otherwise, it may

lead to a serious injury.

•

CAUTION

To avoid accidents:

make sure to set the ROPS up-

right and fasten the seat belt

during work. If it is necessary

to work with ROPS folded, do

not fasten the seat belt. fas-

tening seat belt with folded

ROPS can be dangerous in

case of tractor rollover.

•

TD210-호주향-DK4810,5310,5810(HS)-015 15

2018-09-07 오전 10:36:36

Содержание DK4810











































































































































































































Результаты поиска

Содержание DK4810

Отзывы:

Kioti DK4810, Руководство пользователя, Страница: 113 / 202

Результаты поиска

Содержание DK4810

Отзывы: