Kioti DK4810 Скачать руководство пользователя страница 169

Страница: 169 / 202

maintenance

1. when storing the tractor for a long

period, remove the battery from

tractor and store in a dry place out

of direct sunlight.

2. the battery self discharges while it is

stored. recharge it once every three

months in hot seasons and once ev-

ery six months in cold seasons.

DIRECTION fOR sTORAGE

(1) air line hose

(2) clamp

1. if the hose clamps are loose, tight-

en clamps securely.

2. if the hoses and clamps are dam-

aged, you must replace them at

once. failure to do so could lead

to engine damage.

td2O727A

ChECkING INTAkE AIR lINE (x)

t46OA36A

(a) wheel - to - wheel Distance at front

(B) wheel - to - wheel Distance at rear

1. Park tractor on a flat surface.

2. turn steering wheel so front wheels

are pointed straight ahead.

3. lower the implement, lock the

parking brake and stop the engine.

4. measure distance between tire

beads (center) at front of tire and

hub height.

5. measure distance between tire

beads at back of tire and hub height.

ADJUsTING TOE-IN (y)

ADjUSTINg PROCEDURE

TD210-호주향-DK4810,5310,5810(HS)-027 27

2018-09-07 오전 10:37:53

Содержание DK4810











































































































































































































Результаты поиска

Содержание DK4810

Отзывы:

Kioti DK4810, Руководство пользователя, Страница: 169 / 202

Результаты поиска

Содержание DK4810

Отзывы: