Kioti CK25, Руководство пользователя

Страница: 77 / 128

HYDRAULIC UNIT 7-5
704O708B
(1) Double Acting Lever 1
(2) Double Acting Lever 2
(A) A PORT (C) C PORT
(B) B PORT (D) D PORT
DOUBLE ACTING LEVER
Pressure
Port
Push
In
Out
In
Out
A
B
C
D
Pull
Out
In
Out
In
Port A, B, C, D
Returning
Coupler Size
PT 1/2´´
Pull
Out
In
Out
In
Move the lever up or down and hold. This
will raise or lower the implement. Lever
will return to neutral when released.
IMPORTANT
Do not hold the lever in the “pull”
or “push” position once the remote
cylinder has reached the end of the
stroke, as this will cause oil to flow
through the relief valve. Forcing oil
through the relief valve for extended
periods will overheat the oil.
CAUTION
To avoid personal injury:
Stop the engine and relieve pres-
sure before connecting or discon-
necting lines.
Do not use your hand to check for
leaks.
CONNECTING
1. Clean both couplers.
2. Remove dust plugs.
3. Insert the implement coupler to the trac-
tor hydraulic coupler.
4. Pull the implement coupler slightly to
m a k e s u r e c o u p l e r s a r e f i r m l y
connected.
DISCONNECTING
1. Clean the couplers.
2. Relieve pressure by moving hydraulic
control levers with engine shut off. Pull
the hose straight from the hydraulic
coupler to release it.
3. Clean oil and dust from the coupler,
then replace the dust plugs.
Your local KIOTI Dealer can supply
parts to adapt couplers to hydraulic
hoses.
NOTE
Lever1
Lever2
Do not hold the lever in the “pull”
or “push” position once the remote
cylinder has reached the end of the
stroke, as this will cause oil to flow
through the relief valve. Forcing oil
through the relief valve for extended
periods will overheat the oil.