manualshive.com logo in svg

Kinova Gen3, Руководство пользователя

Поделиться
Скачать
Kinova Gen3 Скачать руководство пользователя страница 112

KINOVA

®

 

Gen3 Ultra lightweight robot 

User Guide

112

Figure 54: Configure protection zone

There are two tabs:

• Zone Shape - for defining the protection zone geometry
• Limits - for setting limits on velocity within an envelope surrounding the shape.

Zone Shapes

Three protection zone shapes are available:

• Rectangular prism
• Sphere
• Cylinder

The dimensions of the zone (in cm) are configurable:

• For a Prism shape, this means height, width, and depth
• For a cylinder, this means the height and radius
• For a sphere, it means the radius

In addition, a thickness (in cm) can be defined around the outside of the protection zone where
motion is allowed but velocity is limited.

The default is for the protection zone to be centered on the robot base, with its z-axis aligned
with the base z-axis. However, this is also configurable. The center of the protection zone can be
displaced in the x, y, and z directions. It can also be rotated around each of the base axes.

Limits

Figure 55: Limits tab

Under the Limits tab, limitations can be set for the protection zone. Limits between 0 and 10
cm/s can be set for:

Содержание Gen3





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды