MULTI-FLO CONTROL SETTINGS
To chase one lamp
progressively
from one Multi-Flo to another
throughout the chain:
•
Set address of first Multi-Flo to
“
001
” , second to
“013”
, third
to
“025”
and so on using
multiples of 12.
•
Turn on power switch.
Set the DMX TERMINATE switch on the LAST
unit to
“I” CLOSE
. The preceding units in the
daisy chain must have the switch set to
“O”
Open
.
DMX-ONÉ CONNECTIONS
(A)
Plug in 5 pin XLR DMX cable into DMX
output plug and connect to a fixture’s
DMX Input plug.
(B)
Plug in power cable to DMX-ONÉ AC
power input. (100-240 VAC, 50-60Hz)
11
DMX-ONÉ SETTINGS
(A)
Turn on power switch.
(B)
Set RATE/DIM switch to
DIM
and
turn MASTER up to
max.
(C)
Set NUMBER OF CHANNELS to
number of
LAMPS
being chased
(D)
Set RATE/DIM switch to
RATE
.
(E)
The MASTER knob controls the
rate of chase. One lamp will
progressively chase from one Multi-
Flo to another throughout the chain.
Содержание DMX-ONE
Страница 1: ...Operation Manual DMX ONÉ ...
