Operating power supply
•
Ensure that power mains switch is OFF.
•
For interior use only. Keep dry.
•
Attach power input cable to 100-230VAC 50/60
Hz power source.
•
Connect 4 pin XLR control cable to power
supply and control box on pressure cowling.
Voltage, 24 VDC
•
Connect the air hoses from the compressor to
the control box on the pressure cowling.
•
Turn power mains ON
•
The silver or blue button on the power supply
is the inflator button. The black button on the
head control box is a secondary inflator button.
Either button can be used to maintain air
pressure.
•
Auto fill switch, will automatically maintain bag
pressure
•
A green LED on the power supply will light as
soon as the pressure in the bag is ok (10-50
mbar / .145 - .725 psi )
•
Red LED indicates low pressure, below 10
mbar / .145 psi
6
Inflator valve
Auto fill
switch
LED
indicator
Securing Lamp Head
•
Due to the weight of the Bag-O-Light it is
important to secure the lamp head with
additional bracing. The yoke locks will be
insufficient to maintain the orientation of
the fixture.
•
Add a clamp and grip head as illustrated
once the fixture angle is determined.
IMPORTANT!
Install Diffuser
Lens
For even light distribution and to help protect
the bag from excess heat build up, use the
light
diffusion lens
. Failure to use the lens will
result in damage to the bag.
