KINGZO GMD120-D, Руководство пользователя

Страница: 5 / 8

4.2.4 When the motor is rolling up the plastics, the pipe arrives
at the required position, at this time rotate the knob which
controls the rolling status and make the gear pin touch the
micro switch( with click sound), hold on and fasten the lock
bolt by a cross head screw-driver.
4.2.5 When the motor is rolling down the plastics, the pipe arrives
at the required position, at this time rotate the knob which
controls the rolling status and make the gear pin touch the
micro switch( with click sound) , hold on and fasten the lock
bolt by a cross head screw-driver.
4.2.6 The above steps would set up the motor’s limit range. Turn
on the power and check if the range setup is correct. If it is
not correct, please review the manual carefully and do the
setup again.
5. Maintenance
5.1 Check the bolts on each connection regularly. Replace the
bolts which is deformed or snapped.
5.2 No need to refill the gear oil during the life duration of this
product.
5.3 This product could be used for greenhouse rolling ventilation
and curtaining system. For other usage, please consult our
company first.
6. Common problems and solutions
1
、
Safty tips
1.1 The life of this roll-up would be extended by proper operation
and maintenance, please kindly operate according to this
manual strictly.
1.2 This product needs DC24V input currency. Specialist or
electrician is needed to connect the power. Please don’t
connect
、
AC220V or any other unspecified power, or there
would be damage or fires.
1.3 When the rolling pipe is rolling to high position with the plastics,
please don’t loosen this product with the pipe. Or the rolling
pipe will fall down fast and there would be possibility to hit
person or to cause damage to the product.
1.4 Cut off the electricity when there is lightning or the motor
could be damaged.
1.5 The rolling pipe could be at the same line with the motor
shaft. The curve of the pipe should not be too big, or the
motor could be damaged by overload.
1.6 Please check and fasten the bolts connecting the electric
winch and its accessories; loose bolts will cause danger.
1.7 If the product didn’t work
，
please don’t uninstall the part
inside; you should stop operating and contact the distributors
or the company.
1.8 Please don’t put the product into water and store it in moist
environment; the product could be damaged or cause danger
to operators. If the products have water leaking inside, please
stop operating and send it back to the factory for repair.
1.9 Please don’t toss or throw the products, it should be prevented
from outside force.