KINGZO GMD120-D, Руководство пользователя

Страница: 6 / 8

7
4.2 Limit switch adjusting
4.2.1 Loosen the left and right lock bolts by a cross head screw
-driver, at the same make sure the gear pins don’t touch
the micro switch.
4.2.2 Turn on the power, and make the motor run, confirm the
status of the rolling pipe, is it rolling up or rolling down.
4.2.3 When the motor is rolling up the plastics, rotate any of the
knobs slowly, and make the gear pin touch the micro switch
( with click sound) , if the motor stops running, it means this
knob is used for the rolling you need; if the motor doesn’t
stop running, then the other knob is used to control the
required rolling.
4
、
Limit range adjusting
4.1 Limit illustration
Before limit adjust, please loosen“left or right fasten bolts”
After limit adjust, please fasteb“left or right fasten bolts”
CAUTION: After the limit adjust is finished, please fasten the bolts. Or the
limit will not be accurate and there would be dange of power shock.
2
1.10 The user should keep the site clean and swipe the leaves
or snow on the plastics to avoid overload damage.
1.11 After the adjust is finished, the user should fasten the bolts
or there might be damage or accidents.
1.12 Don’t use the product over the maximum currency.
1.13 In the transportation or in installation please prevent the
products from falling; tossing the cable is prohibited.
1.14 We are not responsible for the damage due to ignorance
of our instruction manual.
2
、
Product Features and Performance data
2.1 Product Features
This product is compact in structure, reliable in performance,
convenient in installation and operation, adjustable reversing
switch
，
with reversing-lock function;
2.2 Outside Drawing
Left gear pin
Left lock bolt
Left knob
Right gear pin
Right lock bolt
Right knob
Micro switch