18
Appendix E Mounting Templates
Kingston Technology Company
KNS1600/R User’s Guide - Rev. B00
Appendix E Mounting Templates
The Fast EtheRx Switch can be stationed on a flat surface using the four rubber
feet provided, or mounted in a standard 19” rack by using the mounting
brackets and 4 thumb screws provided with the unit.
Rubber Feet for Desktops
The Fast EtheRx Switch comes with rubber feet that may be applied to the
bottom of the unit for desktop surface installations. The 4 rubber feet have peel-
off adhesive backing. Remove the backing and attach the feet to the bottom of
the switch.
Brackets for Rack Mounting
The Fast EtheRx Switch can also be mounted in a standard 19” rack using the
brackets included with the unit. A rack mount installation uses a standard 19”
dimension. Align the holes in the brackets with the holes on each side of the
unit. Use the 8 screws provided to secure the brackets to the Fast EtheRx
Switch. See Figure E-1 below:
Fig. E-1-Attaching the Mounting Brackets
