background image

Introduction                                                                                                         1 

KND2410TX User’s Guide - Rev. A01 

Kingston Technology Company 

Introduction 

 

Intended Audience:

 This manual assumes that the user has a general working knowledge 

of networking principles and is familiar with network systems in general. 

Congratulations on the purchase of your Kingston Fast EtheRx Stackable 10/100TX 
Rack-Mountable Dual Speed hub.  There are three models available: 

KND810TX

 (8-port 

model), 

KND1610TX

 (16-port model) 

KND2410TX 

(24-port model).  The KND810TX 

and KND1610TX can be used on a desktop or standard 19” rack-mount installation, 
using the extended mounting brackets provided with the unit.  The KND2410TX is a full 
19” rack-mount unit.  The Fast EtheRx Stackable 10/100TX Dual-Speed hubs conform to 
IEEE802.3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.3 CSMA/CD 
standards.  Using any combination of the dual-speed hubs, you can stack up to a 
maximum of four hubs. 
For ease of installation, the Fast EtheRx Stackable Dual Speed hubs offer eight (8), 
sixteen (16), or twenty-four (24) UTP ports that auto-negotiate 10/100Mbps operation 
and an uplink port that allows the last UTP port on the hub to support both crossover and 
straight-through cabling. By default port 7 & 8 (KND810TX & KND1610TX) or port 23 
& 24 (KND2410TX) are set for auto-negotiation but can be manually configured for 
either 10Mbps or 100Mbps operation, using the dip switches located on the back of the 
unit.  Ideal for inter-connecting 10BASE-T Ethernet networks with 100BASE-TX Fast 
Ethernet networks, the Fast EtheRx Dual-speed hubs can also be used as simple stand-
alone 10BASE-T or 100BASE-TX repeaters.  For easy trouble-shooting, the front panel 
includes a variety of diagnostic LEDs such as Power, Collision for 10Mbps and 
100Mbps, 100TX, Link, and Activity status. 

For the remainder of this manual, the Fast EtheRx Stackable 10/100TX Dual-Speed hubs 
will be referred to collectively as the Fast EtheRx Dual-Speed hubs: 

KND810TX - Fast EtheRx Stackable 8-port Rack-mountable dual-speed hub 

KND1610TX - Fast EtheRx Stackable 16-port Rack-mountable dual-speed hub 

KND2410TX - Fast EtheRx Stackable 24-port Rack-mountable dual-speed hub 

Model Types 

Fig. 1-1  – KND810TX, KND1610TX, & KND2410TX 

24

5

6

7

8

9

10

11

12

17

18

19

20

1

2

3

4

13

14

15

16

21

22

23

24

PWR

100

10

COLL

100TX

L I N K

/ ACT

1

2

3

4

5

6

7

8

Содержание KND1610TX


























Отзывы: