Page 3 of 13
Quick Set up Guide
Owner’s responsibility
This manual contains important information about your tank and how you should
maintain it to maximise its service life. However, there are some important first steps
before you move on:
1)
Ensure your tank is always at least 10% full
Right after your tank is installed, it will be filled to 10% capacity. It is crucial that
your tank is always at least 10% full of water.
2)
Ensure there is sufficient aggregate around your tank as stated in the previously
provided Pad Specification document. Go to page 5 for more information. Note:
not applicable for tanks with a concrete pad/ring beam.
3)
Fill out your tank’s details on page 1. This will make it easier for you in the future
when you need maintenance work or servicing. You will also find your tank details
on the tags attached to your tank like the below:
4)
Your tank comes with a 20 year conditional warranty as detailed in this document.
Whilst we hope you will never need to rely on this warranty, this document will help
you to get the assistance you need in a quick and efficient manner. To help with
this process, please take a moment to register your tank warranty at:
http://kingspan.com/au/rhinowarranty
and advise us should your contact details
change.
