BRICK CLIP AND SCREW
LEFT AND RIGHT SIDE
REAR LOG PANEL
PLACE SIDE OF REFRACTORY PANELS
TIGHT AGAINST FIREBOX &
TIGHTEN BRICK RETAINER CLIPS.
19
INSTALLING BRICK PANELS
FOR MODEL ZDV4224 AND
ZDV4228
1. PLACE REAR BRICK PANEL AGAINST
REAR OF FIREPLACE.
2.
LOOSEN SCREWS HOLDING BRICK
CLIPS IN POSITION, ROTATE CLIPS UP
OUT OF THE WAY. PLACE SIDE BRICKS
UP TO REAR BRICK AND FLUSH AGAINST
SIDE WALLOF FIREBOX. POSITION CLIPS
OVER BRICK AND TIGHTEN SCREWS.
Brick Installation
INSTALLING BRICK PANELS
FOR MODEL ZDV4232
1. REMOVE DOOR GLASS FROM THE
UNIT BY UNLATCHING THE 2
LATCHES ON TOP OF THE UNIT.
2. REMOVE THE FALSE BOTTOM
FROM THE UNIT BY LIFTING
STRAIGHT UP. IT MAY NEED TO BE
WIGGLED.
3. PLACE REAR BRICK PANEL UP
AGAINST THE REAR OF THE
FIREBOX.
4. LOOSEN SCREW HOLDING BRICK
CLIP IN POSITION. MOVE CLIP UP
OUT OF THE WAY AND PLACE SIDE
BRICK UP TO REAR BRICK AND
FLUSH AGAINST SIDE WALL OF
FIREBOX. POSITION CLIP OVER
BRICK AND TIGHTEN SCREW.
5. REPLACE FALSE BOTTOM.
6. INSTALL LOG SET AS PER
INSTRUCTIONS AND RE-INSTALL
DOOR.
