Kingsman FDV200, Руководство по установке

Страница: 4 / 35

MOBILE HOME/MANUFACTURED HOUSING INSTALLATION
This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions
and the Manufactured Home Construction and Safety Standard Title 24 CFR, Part 3280, or the current Standard for
Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities ANSI/NCBS A225.1, and with CSA
Z240.4 Mobile Home Standard in Canada.
WARNING: Do not compromise the structural integrity of the manufactured home wall, floor or ceiling,
during installation of appliance or venting.
For required venting components see venting installation in appropriate section of this manual.
4
THE FDV200N, FDV200PN, FDV200LP and FDV200PLP MAY BE INSTALLED IN MANUFACTURED (MOBILE)
HOMES AFTER FIRST SALE.
Please follow the current ANSI/NFPA 70 National Electrical Code in the USA and CAN/CSA C22.1 Canadian National
Electrical Code in Canada.
Appliance must be grounded to the steel chassis of the home with 8 ga. copper wire using a serrated or star washer
to penetrate paint or protective coating to insure grounding.
Use carriage bolt at the attachment point (see diagram above) to secure the appliance to the floor.
For Pedestal Models attach two points inside the Pedestal base to the floor.
4