2785FPT - Installation in a Wooden Enclosure
1. Minimum size of wood enclosure must be no less
than 32.5” I.D. x 39.5” I.D.
2.
Non-combustible material
(e.g., Wonder Board)
for the top of enclosure must be used, along with
metal gussets.
3. Non-combustible materials such as tile or brick
may be used to finish on top of Wonder Board. Do
not use any combustible materials to finish top,
e.g., wood or plastic products.
4. You must have an opening in the enclosure to
have access to the on/off valve.
5. A minimum of [2] 1” x 4” air openings are required.
Minimum
Opening
Minimum Size for
FP2785T Combustible
Enclosure
Combustible materials
may be used only on
outer portion of cabinet.
Metal Gussets
Control Panel
Cutout size is
8-1/2” x 2-1/2”
Minimum of [2] 1” x 4”
Air Openings Required
7” MAX
on Control
Panel Side
7
