(b)
With the gas valve knob released and flame
continuing to remain present in the combustion area,
you can now select the flame height you would like for
your enjoyment. If you turn the gas valve knob further
counterclockwise until it stops, the appliance will be
running at the maximum. Turning the valve control knob
back (clockwise) until it reaches the Stop Point is the
lowest setting. The flame can be modulated by setting
the valve control knob anywhere between these two
points. It may be necessary to select a higher setting
due to windy conditions. This will be evident if the
appliance flame is being blown sideways or if it is
extinguished due to lack of flame contact with the
thermocouple. Extremely windy conditions are not
recommended for operation of the appliance, as flames
are being blown out of the combustion area and can be
very hazardous, causing personal or property damage.
Also, if the flame is not allowed to burn properly in the
designated combustion area, the thermocouple may not
be properly or constantly heated and the appliance will
continue to shut off repeatedly.
5.
Once you are finished enjoying your appliance, turn the
gas valve control knob clockwise until it stops (Stop
Point / Lowest Flame Height). Once there, depress the
gas valve control knob and continue to turn clockwise
until it stops at the Start Point / Off Position and release.
All flames should become extinguished. Finally, do not
forget to turn off your gas supply for the appliance when
you are not using it. This could be turning your propane
tank off or locating your natural gas line shut-off and
turning it to the closed position.
27
