EN
18
EN
In
more
detail...
NMHT18-Li
Product functions
Intended use
This cordless hedge trimmer NMHT18-Li is designated with a rated voltage of
18 V
. It is designed only to be used with the battery pack which is listed in
The product is intended for cutting and trimming of hedges, bushes and shrubs in
domestic gardens. The maximum cutting capacity must be observed. Do not cut
branches exceeding the stated maximum capacity.
The use of this product in case of rain or humid environment is prohibited.
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Switching on/off
1. Ensure the cutting device (blade) (1) does not touch any objects. Remove
the blade cover (11) from the cutting device (blade) (1) before switching the
product on.
2. Hold the product with one hand on the front handle (4) and the other hand on
the rear handle (6).
3. Squeeze the safety switch (3) and hold it in position (Fig. 6, step 1).
4. Squeeze the on/off switch (7) to switch the product on (Fig. 6, step 2).
5. Release either the on/off switch (7) or the safety switch (3) to switch the
product off.
1
3
4
6
7
1.
2.
Fig. 6
MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 18
9/13/21 1:09 PM
