EN
24
EN
In
more
detail...
NMHT18-Li
Troubleshooting / Recycling and disposal
Troubleshooting
Problem
Possible cause
Solution
4. Product
suddenly
stops
4.1 Battery pack is
discharged
4.1 Remove and charge
battery pack
4.2 Battery pack is too hot
4.2 Remove battery pack
and let it cool down
4.3 Cutting device is blocked 4.3 Remove blockage
5. Excessive
vibration or
noise
5.1 Blade is dull/damaged
5.1 Replace with a new one
5.2 Bolts/nuts are loosen
5.2 Tighten bolts/nuts
Recycling and disposal
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.
For further information visit www.recycle-more.co.uk.
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the
product is working properly. Recycle the package afterwards.
Disposal of an exhausted battery pack
The battery is Li-Ion type. To preserve natural resources, please
recycle or dispose of the battery pack properly. Consult your local
waste authority for information regarding available recycling and / or
disposal options.
Discharge your battery pack by operating your tool, then remove the
battery pack from the tool and cover the battery pack connections
with heavy duty adhesive tape to prevent short circuit and energy
discharge.
Do not attempt to open or remove any of the components.
MNL_NMHT18-Li_18V 50cm Hedge Trimmer_V1_210913.indd 24
9/13/21 1:10 PM
