EN
20
EN
In
more
detail...
NMGT250
Operation
Trimming
6. Ensure the cutting device remains clean and free from off-cuts that may
cause it to jam. Check regularly. Release the on/off switch (2) and disconnect
the product from the power supply before checking.
7. Trim longer grass in stages; do not cut long grass in one cut (Fig. 10). For the
best results, cut longer grass in steps (Fig. 11).
Fig. 10
Fig. 11
Tips
1. For best results, do not cut wet grass because
it tends to stick to the cutting head and guard,
prevents proper discharge of grass trimmings,
and could cause you to slip and fall.
2. Do not allow the spool cover to drag on the
ground or other surfaces.
3. Pay special attention when performing the work
close to trees and bushes. The cutting head
could damage sensitive bark, and damage fence
posts (Fig. 12).
Fig. 12
NOTE:
The trimming line will wear faster and require more replacement
if cutting is done along sidewalks or other abrasive surfaces or heavier
weeds are being cut.
NOTE:
While trimming, the cutting device is possible to be blocked by
grass or unevenly ground. So the product will turn off automatically due
to over current. Therefore release the on/off switch for over 3s and then
press down again to go on with trimming.
No name_MNL_250W Grass Trimmer_GB_V4_210918_UK.indd 20
9/22/21 4:23 PM
