EN
NMGT250
Getting
started...
Before you start
15
Before you start
Pole assembly
1. Align and slide the sliding slot of the middle pole (7) onto the spigot (8a) of the
lower pole (8). Fully insert the middle pole (7) and make sure that the screw
holes (7a, 8b) are well aligned (Fig. 1, step 1).
2. Align and slide the spigot (6a) of the upper pole (6) onto the sliding slot of the
middle pole (7). Fully insert the upper pole (6) and make sure that the screw
holes (6b, 7a) are well aligned (Fig. 1, step 2).
WARNING!
Don’t pinch or bend the inter-connection power cord during
the assembly of poles (6, 7, 8).
3. Secure the upper pole (6), the middle pole (7) and the lower pole (8) with four
screws (13) in clockwise (Fig. 2).
6
7
8
1.
2.
6a
6b
7a
7a
8b
8a
Fig. 1
6
7
13
8
Fig. 2
Guard
1. Turn the trimmer head (10) upside down.
2. Align and slide the guard (9) onto the sliding slots (10g) of the trimmer head
(10) (Fig. 3, step 1). Fully insert the guard (9) and make sure that the screw
holes (9c, 10h) are well aligned.
3. Secure the guard (9) with the screw (13) in clockwise (Fig. 3, step 2).
9
9
9c
9c
13
10h
10
10g
1.
2.
Fig. 3
No name_MNL_250W Grass Trimmer_GB_V4_210918_UK.indd 15
9/22/21 4:23 PM
