Revision 2 Date: 15 Sep 2022 Page - 9 - of-20
About
submenu:
Device
submenu:
Tap to do Firmware update (see
section 7.5 for detail instruction).
Tap to restore settings to factory
defaults.
Tap and move left/right along
the bar to adjust brightness of
image. Recommended 185~195
(for Single fiber) or 75~85 (for
Multi fiber).
Select “Single fiber” for all non
-
MPO connector or, select “Multi
fiber” for MPO connector from
dropdown menu.
Tap this, highlight date / month
/ year / time, and use up/down
arrows to select the desired
values.
If
“Auto” is checked, LCD
display
’s
brightness is adjusted
automatically according to light
level around the instrument.
If
“Auto” is unchecked, t
ap and
move left/right along the bar to
adjust brightness of image.
Select “10” or “20” or “30”
minutes from the dropdown list
or “never” to disable auto
power off.
Select “Apply” to save
setting followed by “OK” to
returned to Main Display.
Select “Cancel” to returned
to Main Display without
saving setting.
Tap symbol on the right of field
then, tap on the selected field
to display virtue keyboard. Use
keyboard to enter the desired
text/value. These entered
text/value will be auto saved in
the pass/fail report.
