Revision 2 Date: 15 Sep 2022 Page - 14 - of-20
For MPO12 connector:
Note that this process involves a 3-step image acquisition cycle (capturing images for 4 fibers in each
step) before the actual analysis.
①
Install a MPO adaptor (OPT636) on instrument (see section 7.1.9).
➁
Switch on instrument (see section 7.1.5).
➂
Mount adaptor of instrument onto connector to be inspected. Set up the instrument for pass/fail
analysis on the display as shown in the example below.
•
Depending on MPO connector
type, select the appropriate IEC
specification
with suffix, “MT12”
from the drop dropdown list.
Note:
“IEC2.0
-
x” specifications are
compliant
with
standard,
IEC61300-3-35 2015 Ed2.
“IEC1.0
-
x” specifications are
compliant
with
standard,
IEC61300-3-35 2009 Ed1.
•
Make sure autofocusing is on
(“AF On”
).
•
Tap on field and enter
value/text via the virtue
keyboard.
The entered value/text will
be used as the name of the
file in which the analysis
data/report is saved.
If “Inc” is checked, numerical
value in the “ID” field will be
incremented upon
completion of each analysis.
•
Select a data saving option for
the analysis from dropdown
list. If “not” is selected, no
analysis data will be saved.
See section 7.4 for data types
saved in instrument.
•
Tap to select “Layer On” to
show an overlay on image
when analysis completes.
Once a specification is
selected, this display will be
shown.
