6
Electronic Programmer
1.
Push button for selecting a function
2.
Decreasing control button
3.
Increasing control button
4.
Display
5.
Cooking Duration pilot lamp
6.
End of cooking pilot lamp
7.
Minute minder pilot lamp
8.
Time of day pilot lamp
The oven will work only if the time of day has been
set. Moreover, the oven can also be operated without
any programme.
Setting the time of day
When the power supply is switched on, or after a power
failure, the Time of day pilot lamp will flash on the display.
To set the correct time of day:
1.
press button or .
2.
After the setting is carried out, wait for 5 seconds: the
Time of day pilot lamp will go out and the display
will show the set time. The appliance is ready for use.
To reset the correct time of day:
1.
press button
repeatedly to select the Time of day
function. The relevant pilot lamp will start flashing. Then
proceed as described above.
The time of day can only be reset if no automatic function
(cook duration
or end of cooking
) has been set.
Cooking Duration function
Thanks to this function, the oven will automatically switch off
at the end of a programmed cooking duration time. Place
food in the oven, select a cooking function and adjust the
cooking temperature. Press button
repeatedly to select
the Cooking Duration function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
To set the duration time:
1.
press button or .
2.
After the setting is carried out, wait for 5 seconds: the
4
5
1
2
3
6
7
8
FO 2571
