KING KD1500, Руководство пользователя

Страница: 22 / 36

Page 20
Section 7
TAILGATER MODE
IMPORTANT!
The antenna unit requires a
“direct line of sight” to the
satellites for signal reception.
Any tall objects can block the
signal from reaching the antenna.
1. If your KING Rover controller is not on, press POWER and wait for the COAX CONNECTION
light to remain on.
2. Plug your receiver and TV into a 110 volt AC power source.
The green power light on your receiver should illuminate or begin cycling on and off.
Wait for the green light to turn solid. This may take up to two minutes.
If it does not turn solid, power on your receiver using the front panel POWER button.
(On ViP211z models, this is located behind the door panel.)
3. Plug in and turn on your TV.
In your TV’s input selection menu, choose the input that matches the connection from your
receiver (example: if using an HDMI cable from your receiver, choose the HDMI input on your
TV). See your TV owner’s manual for details.
IMPORTANT! You must have chosen Tailgater Mode on pages 10-11.
Your local channels may not be available when traveling outside your home area.
If your receiver is NEW AND UNACTIVATED, START HERE.
If not, go to page 26.