KING KD1500, Руководство пользователя

Страница: 19 / 36

Page 17
SCAN FOR SATELLITES
1. Press and hold SCAN for 3 seconds .
• The antenna will scan for the selected satellites. The four SCAN PROGRESS lights will
cycle on and off to indicate a scan is in progress.
• As satellites are located, the corresponding SCAN PROGRESS lights will turn on (see
below).
• When scan is complete, the appropriate lights will turn on to show which satellites were
found.
•
Wait for the program guide to download and then select your desired channel.
NOTE:
If you move the vehicle, you will have to re-acquire the satellites by repeating the scan process. The KING
Rover will go into “sleep mode” after 15 minutes and the
COAX CONNECTION
light will dim. Press
POWER
to
wake unit up if necessary, i. e. the unit is in sleep mode, you move the vehicle, and wish to rescan for satellites.
To turn the unit off at any time, press
POWER
for 3 seconds.
DISH AND BELL TV SUBSCRIBERS:
If you are using a second receiver, see SECOND RECEIVER OPERATION -
DISH AND BELL TV on page 18.
Use this chart to determine which satellites have been found.
NOTE: The order of the lights corresponds to the order of the satellites listed.
Example for DISH SD : The 110 satellite corresponds to Light 1, and the 119
satellite corresponds to light 2.