Page 51 of 57
King Pigeon Hi-Tech. Co., Ltd.
Ver 1.0
4G Wireless Industrial Router
Wireless Data Connectivity
The static route does not change according to the network structure. When the destination network
path changes or the network is faulty, you can manually re-specify the path from the packet to the
destination network by manually modifying the corresponding static routing table.
After the static route is added, click <Current Routing Table> to check whether the added static route
takes effect. If the wrong route is added, it will only be displayed in the routing table in the following
figure, but it will not take effect. There is no such route in the routing information table.
Static Route
Item
Description
Default
Selection
The router has a total of 20 static routes to choose
1
Comment
You can comment on the static route
empty
Destination address
Destination IP address
0.0.0.0
Subnet mask
The destination address subnet mask to be reached.
0.0.0.0
Next hop address
The IP address of the next router that the data needs to pass before
it reaches the destination address.
0.0.0.0
NOTE:
After setting, click <Routing Table> to check whether the added static route takes effect.
If the wrong route is added, it will only be displayed in the routing table in the following figure, but it
will not take effect. There is no such route in the routing information table.
[Example]
In company,not only can connect external network via wireless router B,but also can connect intranet
server via wireless router A.The company computer needs to be able to access both the external network
and the internal network server without modifying the IP address and gateway of the local connection.
Configuration example is as follows:
