Connect with Wireless Siren
Connect with Wireless Switch
The alarm system inbuilt audible alarm function, in addition, you can also connect with
the wireless siren (*optional) for the whole system.
Just connect the power adapter of wireless siren is OK, then you can press
for test if the siren is working or not.
Please note that the wireless siren function works only on
“
Coding 1
"
on
“
Advanced
Setting
”
--
“
RF Interlock Switch
”
.
If you want to use the alarm system to operate other device but not the siren, you can
select code 2 or code 3 and then programming the wireless switch as same as above
mentioned on page 31.
29
30
You can also call in to open your door or other devices by interlock settings(your phone
number must on the alert numbers list, Caller-ID), setting method refer to page 20.
1. Interlock Armed by call: when you call in, system reject and recall back
to confirm the arm success (you should reject the system
’
s recall), and open your
door at same time.
This setting will help you to open the garage or main gate when leaving home by a
single phone call.
2. Interlock Stay by call: you should call the system twice within 30 seconds
to change the status to Stay Home Arm mode, and open your door at same time.
This setting will help you to open the garage or main gate when back home.
3. Disabled the remote access control interlock function.
Works with the wireless switch WS1 (optional), you can remote open your electronic
lock or other devices by pressing or control by incoming phone call.
Add wireless switch steps:
1. Connect WS1 relay output to the electronic lock as a switch.
2. Connect 12VDC from your lock to the WS1.
3. Press the learning button on WS1, LED flash quickly.
4. Press , WS1 LED off, connection created.
5. Press for test.
How to open the door by phone call
1. Coding 1
2. Coding 2
3. Coding 3
1. Coding 1
2. Coding 2
3. Coding 3
Specifications
GSM Frequency
Radio Frequency
Digital Output
Rated Power Supply
Power Consumption
SIM Card
Antenna
Temperature Range
Humidity Range
Backup Battery
Exterior Dimension
Net Weight
Quad-band 850/900/1800/1900 MHz
433.92MHz for sensors, 315MHz for wireless switch (*optional)
1 relay, NC/NO dry contacts,3A/240VAC
9~24V DC/1A
12V input Max. 270mA, Standby 30mA
Support 3V SIM Card
50 Ω SMA Antenna interface
-20~+60 °C
Relative humidity 90% (condensing free)
3.7V/900mAH Li-ion rechargeable
18.8*13.1*2.8 cm (7.4*5.1*1.1 inch)
320 g (0.7 lb)
