King Long XMQ6900 Series, Руководство по эксплуатации

Страница: 69 / 173

Operation Instruction
3-19
Relays & Fuses
The Relays & Fuses Box always installed in the
compartment of the instrument desk or a tool cabin belong
to front right side panel.
The box integrates 50 chip-type fuses, 20 general and
special relays, and has 8 standby chip type fuses, one fuse
clip, which makes its construction more compact and
function more powerful. It improves design of the past
Relays & Fuses Box , therefore it avoids weakness such as
unreliability and short service life, it applies integrated
circuit and designs 5 special relays: intermittent wiper
relay, turning flasher relay, lower water level warning
controller relay, monitor power relay, brake light failure
warning relay (when power supply voltage is lower than
23V, power supply of acoustic set and monitor is cut off
and will be begin to work again after power supply voltage resumes to normal)
.
The vehicle installed the Relays & Fuses Box in the compartment of instrument desk.
Installation Position
The position of Management Module,
CAN Processor Module, and the
Relays & Fuses Box
They are located in the compartment of
instrument desk. When servicing, may open the
desk cabin gate