ASSEMBLY
5. Install housing (A) to three support brackets (B) using 6 hex.
bolts, 12 flat washers and 6 hex. nuts. Make sure the hose
opening faces the fan housing. Before attaching the third
support bracket, place hanger bracket (C) between the support
bracket and the housing, as illustrated in Fig.5. Tighten all
bracket nuts and bolts at this time.
6. Attach hose adapter to inlet cover on motor assembly. Press the
black plastic cover into its hole at the rear of the motor bracket
(Fig.6).
7. Slide hose clamps onto each end of the hose. Attach hose
between the fan housing and the collector housing. Tighten
clamps to secure hose (Fig.7).
8. Insert bag hanger into hanger bracket and then hook top dust
bag to hanger. Insert retainer strap through keeper straps and
fasten to collector housing. Repeat this operation for the lower
dust bag (Fig.8).
FIGURE 5
C
A
B
FIGURE 6
FIGURE 7
FIGURE 8
