ELECTRICAL REQUIREMENTS
POWER SUPPLY
WARNING:
THIS TABLE SAW CAME WIRED FOR 220V
OPERATION AND MUST
BE CONNECTED TO AN
APPROPRIATELY GROUNDED 220V, 30AMP OUTLET AS
SHOWN IN FIGURE 1.
GROUNDING
WARNING:
IF OUTLET IS NOT PROPERLY GROUNDED, THIS
TABLE SAW CAN CAUSE ELECTRICAL SHOCK, PARTICULARLY
WHEN USED IN DAMP LOCATIONS. TO AVOID SHOCK OR FIRE,
IF THE POWER CORD IS WORN OR DAMAGED IN ANY WAY,
HAVE IT REPLACED IMMEDIATELY. Not all outlets are properly
grounded. If you are not sure if your outlet is properly grounded,
have it checked by a qualified electrician.
This table saw must be grounded because if it should malfunction or
breakdown, grounding provides a path of least resistance for electric
current, to reduce the risk of electric shock.
WARNING:
TO MAINTAIN PROPER GROUNDING OF YOUR
TABLE SAW, DO NOT REMOVE OR ALTER THE GROUNDING
PRONG IN ANY MANNER.
ELECTRICAL DIAGRAM
WARNING!
ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN. FAILURE TO COMPLY MAY RESULT IN
SERIOUS INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE TABLE SAW DISCONNECTED FROM THE
POWER SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY!
FIGURE 1
PROPERLY GROUNDED OUTLET
CURRENT CARRYING
PRONGS
GROUNDING
PRONG
30 AMP.
