FENCE OPERATION
The fence can be moved across the table by loosening lock lever (A) Fig. 14,
sliding the fence (B) to the desired position and retightening the locking lever (A).
As the fence is moved across the table, the sliding bracket (C) guards the
cutterhead in back of the fence.
To tilt the fence to the right or left, loosen handle (D) Fig. 15, pull out and turn
index pin (E), and move the fence tilting lever (F) to obtain the desired angle of
tilt; retighten locking handle (D). NOTE: The handle (D) Fig. 15, is springloaded,
and can be repositioned by pulling out the handle and repositioning it on the
serrated nut located underneath the handle.
IMPORTANT: When cutting a bevel, we suggest that whenever possible, the
fence be tilted toward the table as shown in Fig. 16. The fence will then form a
V-shape with the tables and the work is easily pressed into the pocket while
passing across the cutter insert.
OPERATING CONTROLS
& ADJUSTMENTS
FIGURE 14
FIGURE 15
FIGURE 16
