END WALL ASSEMBLY
REUSE
REDUCE
RECYCLE
Now that the frame and cover are completely asembled it’s time to attach the two end walls.
A: Attach each end wall ring to the grommets on the end wall. (Four on each end wall).
B: Next, loosen one side of the support bar on each end (“E” & “F”). Slide the rings on the support bar
(coloured side on end wall facing out). Bolt and secure the support bar.
HOW TO SECURE THE END WALLS:
Both left and right side of each end wall has a run of grommets.
C: Attach an S hook to each grommet and squeeze the attached end
of the S hook, with pliers, so it does not fall out of the grommet.
D: Next loop a ball bungee through each grommet hole of the end
wall (see diagram on the right).
E: After all four sides are completed pull the end wall to the closed
position and hook the ball bungee to the open end of the S hook to
secure the wall closed.
