Kinetec Maestra™
EN
21 / 23
15.5.
Technical specifications
Product:
Lifespan of the machine:
12 years
Weight:
8Kg (17.6 pounds) (without case)
Splint dimensions:
35cm (14 inches) x 41cm (16 inches) x 30cm (12 inches)
Angular limits:
see pages 15 to 19
Speeds:
from 150 to 440° per minute
Patient sizes:
all hand sizes from 7 years old
Maximum weight of the user:
135 kg (297 pounds)
Acoustic pressure:
<70dB
Applied parts:
Remote control, hygienic pads and/or comfort support.
Electricity:
Power supply:
100-240V~
Frequency:
50-60 Hz
Power consumption:
50 VA
Class:
Device of Type BF Class II or Type B Class I
Protection class (device):
IP 20 (protected against solid objects greater than 12.5mm,
but not protected against liquids)
Protection class (carrying case):
IP 01 (non-protected against solid foreign objects,
protected against vertically falling water drops)
Fuse:
T 750mA 250V 6.3 x 32mm (KINETEC
®
order: 4610007434)
Environment:
Storage/transport conditions:
Temperature:
-25 to 70°C / -13 to 158°F.
Relative humidity:
up to 93% without condensation.
Operating conditions:
Temperature:
5 to 40°C / 41 to 104°F.
Relative humidity:
15% to 93% without condensation.
Atmospheric pressure:
700 hPa to 1060 hPa.
15.6.
Symbols used
CAUTION
(consult the accompanying
documentation)
Speed
Flexion limit
STOP (power off)
Timer
Pronation / supination movement
ON (power on)
Force
Wrist movement
Start movement
Pause
Thumb movement
Stop movement
Increase
Long fingers complete movement key
Program access
Decrease
Selective movement
Right way up when box is stored
Extension limit
~
Alternating current
Contains electric and electronic
components; do not throw away with
household refuse.
Fragile
Keep dry during storage or transport
Temperature Limit during storage or
transport
Follow the instructions for use
Follow the instructions for use
Class II device
TYPE BF device
(protection against electric shocks)
TYPE B device
(protection against
electric shocks
)
IP20
IP01
See “Protection class” in section
“Technical specifications”
Humidity limit during storage or
transport
15.7.
Warranty
The KINETEC
®
warranty is strictly limited to the replacement, free of charge, or to factory repairs of part(s) recognised as
defective.
Kinetec SAS guarantees its continuous passive motion systems for 2 years against all defects of manufacture from the date
of purchase by the consumer.
Kinetec SAS is the only organization able to assess the application of the warranty to its systems.
The warranty will be considered null and void if the device has been used abnormally or under conditions of use other
than those indicated in the user's manual.
The warranty will also be considered null and void in the event of deterioration or an accident due to negligence,
inappropriate surveillance or inappropriate maintenance, or due to transformation of the equipment or an attempt to
repair the equipment.
