Kinetec Maestra™
EN
8 / 23
12.7.
To adjust the basic parameters of the movement
Beginning
Keys to
press
Display Remarks
To stop the unit
PRONO/SUPINATION
-10 STOP 5 10
Check that the hand control is not
locked (See page 6).
To choose the movement
PRONO/SUPINATION
-10 STOP 5 10
The display shows the movement
selected, with the default settings.
Successive presses on the keys
or
allows you to select different
movements.
WRIST EXT/FLX
-20 STOP 96 20
WRIST+MP EXT/FLX
0 STOP 96 60
ULNAR DEVIAT.
0 STOP 96 40
THUMB OPPOSITION
0 STOP 96 90
LG FING. EXT/FLX
0 STOP 96 50
INT
0 STOP 96 40
INTRINSIC -
0 STOP 96 90
DISTAL EXT/FLX
0 STOP 96 40
To display the upper or lower limit of the
movement
DISTAL EXT/FLX
0 FLEX 96
40
The value blinks.
DISTAL EXT/FLX
0
EXT 96 70
To change the limit if necessary
or
DISTAL EXT/FLX
20
EXT 96 70
The new value blinks.
To confirm the new value, press another key
or wait more than 3 seconds for automatic
confirmation.
DISTAL EXT/FLX
SPEED 2
While the value blinks press
the
or
key
to change if necessary.
DISTAL EXT/FLX
FORCE _
DISTAL EXT/FLX
TIMER 00H00MIN
Or
To display the pause at the lower limit or
upper limit
DISTAL EXT/FLX
PAUSE HIGH 0s
Successive presses on this key selects
the pause in the lower or upper limit.
DISTAL EXT/FLX
PAUSE LOW 0s
To change the pause if necessary
or
DISTAL EXT/FLX
PAUSE LOW
15s
The new pause value blinks.
To confirm the new value press another key or
wait more than 3 seconds. The display shows
the selected mode
DISTAL EXT/FLX
0 STOP 94 70
The unit is ready to start with the new
parameters.
Note
: the values in the display column are given as an example. In actual use, they will come from stored
programs or previous sessions.
Warning
: Always check the motion parameters displayed on the hand control before starting the
device.
