Kindred has supplied within the sink carton a die-cut corrugated template, 3 1/2" sink strainers (waste
assembly), Homeowner's manual, and hardware kit. The kit is intended to clamp the sink rim to the underside
of the countertop, and backup the silicone seal.
• An assortment of clamps
• A solvent such as methyl hydrate or denatured alcohol
• Silicone sealant
• 1/2" plywood buildup
• 180 grit sandpaper
HARDWARE SUPPLIED BY KINDRED
THE FABRICATOR WILL REQUIRE:
This kit includes the following:
Use for Method One
Use for Method Two
Machine screws
✔
✔
Brackets
✔
✔
Thumbscrews
✔
✔
Tee nuts
✔
1" diameter PVC discs
✔
Loctite Prism 401
✔
0605
30149
METHOD TWO
NOTE: These instructions apply to installation of
Steel Queen Undermount Sinks with
GRANITE COUNTERTOPS
and any
POLYMER BASED MATERIALS
that are not compatible with the adhesive that has been supplied.
• Kindred Undermount sinks have a highly polished sink rim. To highlight this unique design feature,
our installation system reveals up to 3/8” of the sink rim.
• Kindred accepts no liability for damage to the natural stone or solid surface countertop, or sink
fixture, during installation.
• Inspect the sink fixture for any shipping damage, prior to installation. Do not install a damaged unit.
• Aesthetics are essential to presentation of the installed sink unit. Take the necessary care to ensure
that the exposed silicone joint is kept to a minimum, the sink is properly aligned to the cut-out, and
excess silicone is cleaned from the sink.
• Jig saw
• 1 1/2” router guide bushing
• 1/2" straight cutter bit
Kindred Customer Service: 1-866-687-7465 www.kindred-sinkware.com
Installation of Steel Queen
Undermount Sinks