Kinder KRTC00MN, Инструкция по установке и обслуживанию

Страница: 17 / 26

SECTION 3
ASSEMBLING FUEL BED AND COMMISSIONING
3.1 ASSEMBLING THE CERAMICS AND FUEL BED
a) Place the ribbed ceramic fuelbed base on top of the fuelbed support
and pull fully forwards to the burner, Position the two halves of the front
ceramic (L/H & R/H) on the locating channel in the front ceramic
support ensuring it is located onto the lip on the burner front ceramic
support.
Make sure that the fuelbed base is located centrally in the fire box.
Ensure that the fuelbed base fits fully down onto the fuel bed
support and is not lodged on the burner. See Fig. 10 below.
Fig. 10
b) Fit the two ceramic overlays (L/H & R/H) onto the fuelbed base as
shown. (See fig. 11 below)
Fig. 11
17
NOTE : The position of the fuel-bed components are critical to the
performance of the product. Therefore please ensure that the fuel-bed
components are positioned as described in the following section prior to
requesting a service call due to soot build up, poor flame pattern etc.