BATTERYLESS JUMP STARTER
4
A. Voltage Indicators (8) indicate the vehicles battery voltage after connecting the
Batteryless Jump Starter or indicate the Batteryless Jump Starter’s charge volume
when charging.
B. LED voltage Indicators (9) illuminate from RED to GREEN as the Batteryless Jump
Starter recharges.
Understanding the Features of Your Batteryless Jump Starter
Control Panel Display
Description
Voltage Indicator Colour
Fig 1. FAULT: RED LED - Solid steady colour
1. Reverse Polarity.
2. Vehicle battery is too low to recharge Batteryless Jump Starter.
3. Battery Clamps (1 & 2) lose contact during recharging.
RED
Fig 2. READY: GREEN LED - Solid steady colour
1. Batteryless Jump Starter is fully recharged and ready to start engine.
GREEN
Fig 3. GLOW: RED / GREEN LED - Alternating RED / GREEN colour constantly
GREEN / RED
Fig 4. OVERRIDE: GREEN LED - Flashing GREEN then steady GREEN colour
1. Battery clamps (1 & 2) are energized without any protection.
GREEN
Fig 5. UNCERTAINTY: RED LED - Flashing RED & both 12V / 24V Mode Indicators
(5) are illuminated in solid colour
Batteryless Jump Starter is fully recharged to 24V mode from a 12V DC battery,
this may happen from the following.
1. Recharge the Batteryless Jump Starter to 24V mode from a 12V DC battery.
2. The Batteryless Jump Starter is fully recharged from a weak 24V DC battery
and battery’s voltage has fallen down to lower than 15V.
RED
