5
BATTERYLESS JUMP STARTER
Understanding the Features of your Batteryless Jump Starter
1. Pre-Charge Methods
1. 12V DC Battery - Connect the Batteryless Jump Starter to a charged 12V DC battery by connecting the Positive
Battery Clamp RED (1) to the positive battery terminal of the 12V DC battery, then connect the Negative Battery
Clamp BLACK (2) to the negative battery terminal of the 12V DC battery, and press the ON / OFF Button (6), the
Batteryless Jump Starter will begin charging automatically & be fully recharged in minutes.
Note: If Fig 8 is displayed during the charging process at any stage, the battery being used cannot fully recharge the
Batteryless Jump Starter.
2. Battery with 2A USB Output Port- The Batteryless Jump Starter can be recharged from any donor battery with
a 5V DC 2A USB output port via a USB-Micro USB cable (not supplied).
Connect the USB end of the USB cable (not supplied) into your USB batteries 5V DC 2A output port, then
connect the Micro-USB end of the USB cable (not supplied) into the Micro USB Input
Port (7), press the ON/OFF Button (6) and the Batteryless Jump Starter will
begin charging.
3. 12V DC Socket (10) - The Batteryless Jump Starter can be recharged from another
car’s 12V 10A output socket. Plug in the 12V DC Charger Adaptor (10) into your vehicles
12V DC output socket, then connect the plug located on the other end of the cable
into the Power Adaptor/12V DC Input Port (8), press the ON/OFF Button (6) and the
Batteryless Jump Starter will begin charging.
4. Power Adaptor (11) - Insert the plug located on the end of the Power Adaptor (11)
cable, into the Power Adaptor/12V DC Input Port (8), plug the Power Adaptor (11) into
your wall socket and turn the outlet ON.
Press the ON/OFF Button (6) and the Batteryless Jump Starter will begin charging.
2. Sound Indicator
Note: The Built-in buzzer within the Batteryless Jump Starter delivers a sound alert advising you of the following
situations.
1. Ready to start
2. Error
3. Operation Guide
WARNING! DO NOT crank the vehicles engine for more than 3-5 seconds per cranking/starting attempts.
WARNING! The Batteryless Jump Starter must be allowed to cool after consecutive cranking sessions,
failing to do so may cause damage to the Batteryless Jump Starter. Damage caused is not covered under
the Kincrome warranty policy.
KP8001 8 consecutive 3 second cranks, 15 minute cool down
KP8002 5 consecutive 3 second cranks, 20 minutes cool down
Caution: If the vehicle fails to start within the 3-5 seconds, there maybe a reason other than a flat battery
to why your vehicle is not starting. Seek further advice from an automotive repairer to identify the cause (Any such
costs associated with seeking advice from an automotive repairer is not covered by Kincrome).
WARNING! Disconnect the Batteryless Jump Starter immediately after the vehicles’ engine has started.
Содержание KP8001
Страница 12: ...1 1 www kincrome com au ...
