6
BATTERYLESS JUMP STARTER
Petrol
Diesel
Model
Cranking
Current
Warm Engine Cold Engine
Warm Engine Cold Engine
Cold Engine
(No Battery Fitted)
KP8001
400A
5.0 L
4.5 L
3.0 L
3.0 L
1.6 L
KP8002
800A
8.0 L
6.0 L
5.0 L
4.0 L
3.0 L
Operation
WARNING! Ensure that you turn OFF any non-essential vehicle accessories such as headlights, air conditioning,
audio equipment & disconnect any trailer connections, fridges or appliances.
Note: For Diesel engine vehicles, please see GLOW PLUG mode on Page 7 prior to connecting the Batteryless Jump
Starter to your vehicle & attempting to start your vehicle.
1. Standard Operation
A weak battery can fully recharge the Batteryless Jump Starter, as long as the battery voltage is above 5V.
1. Connect the Batteryless Jump Starter to the weak 12V DC battery in your vehicle by connecting the Positive
Battery Clamp RED (1) to the positive battery terminal, then connect
the Negative Battery Clamp BLACK (2) to the negative battery
terminal (Fig 11).
Note: If Fig 8. is displayed during charging, the weak battery can not fully
recharge the Batteryless Jump Starter. Obtain another power source to
charge the Batteryless Jump Starter.
2. The Batteryless Jump Starter will turn ON automatically and the LCD Control Panel Display (3) will indicate the
vehicles’ battery voltage as shown in Fig 1.
3. Press the ON / OFF Button (6), the Batteryless Jump Starter will start to recharge, the LCD Control Panel
Display (3) will indicate the capacitor charging percentage (Fig 2). When charged to operation voltage, the LCD
Control Panel Display (3) will display the ignition symbol (Fig 3).
4. Start the vehicles’ engine, then immediately disconnect the Batteryless Jump Starter from the vehicles’ battery.
2. Pre-Charge Operation (12V DC Donor Battery)
1. Pre-Charge the Batteryless Jump Starter by connecting the Batteryless Jump Starter to the 12V DC donor
battery by connecting the Positive Battery Clamp RED (1) to the positive battery terminal, then connect
the Negative Battery Clamp BLACK (2) to the negative battery terminal, press the ON / OFF Button (6), the
Batteryless Jump Starter will begin charging automatically & be
fully recharged in minutes.
Note: If Fig 8 is displayed during the charging process at any stage when
using a 12V DC donor battery, the battery being used cannot fully recharge
the Batteryless Jump Starter. If this occurs obtain another power source
to charge the Batteryless Jump Starter.
2. Disconnect the Batteryless Jump Starter from the 12V DC donor battery, connect the charged Batteryless
Jump Starter to the flat battery in your vehicle by connecting the Positive Battery Clamp RED (1) to the positive
battery terminal, connect the Negative Battery Clamp BLACK (2) to the negative battery terminal (Fig 12).
3. Press the ON / OFF Button (6) to activate the Batteryless Jump Starter, the LCD Control Panel Display (3) will
now display the ignition symbol icon (Fig 3), confirming the Batteryless Jump Starter is ready to start
your vehicle.
4. Start the vehicles’ engine, then immediately disconnect the Batteryless Jump Starter from
the 12V DC donor battery.
1. Connection - for starting the engine.
Jumpstarter clamp joined to the positive
cable terminal.
2. After Jump Start- engine has started
replace the joined clamps onto the battery
3. Disconnection- With engine running and
positive cable re-connected, remove both
jump starter clamps.
RED
RED
RED
BLACK
BLACK
BLACK
1. Connection - for starting the engine.
Jumpstarter clamp joined to the positive
cable terminal.
2. After Jump Start- engine has started
replace the joined clamps onto the battery
3. Disconnection- With engine running and
positive cable re-connected, remove both
jump starter clamps.
RED
RED
RED
BLACK
BLACK
BLACK
Fig 11
Fig 12
Содержание KP8001
Страница 12: ...1 1 www kincrome com au ...
