8
SMD LED WORKLIGHTS
4) Power Tool Use and Care
a. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g. Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different from those intended could result
in a hazardous situation.
h. The electric motor has been designed for 230V and 240V only.
Always check that the power supply corresponds to the
voltage on the rating plate.
5) Additional Safety Instructions for Worklights
a. Luminaire can under no circumstances be mounted on normally flammable surfaces.
b. Ensure the floodlight is correctly charged before initial use.
c. DO NOT leave the unit in a totally discharged state for an extended period of time as this may result in permanent
damage.
d. DO NOT cover or block the lens during use.
e. DO NOT turn the floodlight on when it is being re-charged.
f. DO NOT shine directly into your, other person’s or animal’s eyes.
g. DO NOT allow children to use the floodlight.
h. DO NOT handle or move the floodlight whilst it is being charged.
i. DO NOT use the floodlight if you suspect that the battery or the spotlight casing is damaged.
j. DO NOT immerse the floodlight in water.
k. Ensure the floodlight is unplugged and allowed to cool before attempting any cleaning or replacement.
l. When not in use store the floodlight in a safe, dry, childproof location.
6) Service
a. Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that
the safety of the power tool is maintained.
Electrical Safety
a. Inadequate extension cords can be dangerous.
If an extension cord is used, it shall be suitable for outdoor use, and the
connection has to be kept dry and off the ground. It is recommended that this is accomplished by means of a cord reel which
keeps the socket at least 60 mm above the ground. Always use an approved extension lead suitable for the power input of this
tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or
defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for
the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
b. Always switch off the mains disconnecting switch when leaving the machine unattended.
c. Never touch the mains plug and the socket with wet hands or use the appliance in the rain.
Содержание KP2301
Страница 14: ...www kincrome com au...
