750
MM
4 BLADE WALL FAN
4
750mm 4 Blade Wall Fan Assembly Instruction
KP1006 - 750mm 4 Blade Wall Fan
Unpack all the components from the box.
1) Mounting The Wall Fan To The Wall
Caution:
The fan must be used in the upright position and firmly fastened
to the wall.
1.
Determine the desired location of the wall fan and ensure that your wall
structure is capable of handling the additional load of the
mounted product.
2.
Mark the three screw holes with a pencil by holding the hanging bracket
(9) to the wall.
Note:
Ensure the two holes on the hanging bracket (9) holes are
horizontal prior to drilling.
3.
Drill the holes at the three pencil marks to suit the anchor being used
(not supplied).
4.
Mount the hanging bracket (9) securely on the wall with three fixing
anchors (not supplied) as per the fastener manufactures instructions.
5.
Hang the motor assembly onto the fan fixing bar (8) then fix the fan fixing
bar (8) onto the hanging bracket (9) (fig 1a, 1b, 1c).
2) Assembling The Rear Safety Grill To The Fan Motor
1.
Align the rear safety grill (2) to the fan motor housing so that the fan
grill securing hole is at the bottom of the fan and align the four screw
holes (fig 2a).
2.
Firmly tighten all of the four screws (fig 2b).
3) Assembling The Fan Blade To The Fan Motor
1.
Rotate the fan motor shaft until the rebated flat area on the shaft is in the
12 o’clock position.
2.
Locate the lock screw in the fan blade coupling; while aligning the screw
and motor shaft rebated flat area push the fan blade (3) all the way onto
the shaft and firmly tighten the grub screw by rotating in a clockwise
direction (fig. 3a), (fig. 3b).
4) Assembling The Front Safety Grill To The Fan Motor
1.
Align the top locking clip on the front safety grill (1) to the top centre of the
rear safety grill (2) that has already been secured to the fan
motor (fig 4a).
2.
Lock the side and bottom clips in place (fig 4b) & (fig 4c).
Note:
The Kincrome logo should be level or horizontal.
3.
Secure the front & rear safety grills together using the fan grill securing
hole in the bottom of the fan grill by inserting the fixing screw and nut
provided (fig 4d) & (fig 4e).
(fig 1a)
(fig 2a)
(fig 3a)
(fig 4a)
(fig 4b)
(fig 4d)
(fig 1c)
(fig 1b)
(fig 2b)
(fig 3b)
(fig 4c)
(fig 4e)
KP1006 Wall Fan Manual.indd 4
4/12/2014 4:07 pm
