IMPORTANT SAFETY INFORMATION
The use of an engine Leveler has inherent dangers to avoid risk of personal injury or property damage make
sure you are fully aware of the operating instructions for this product and any recommendations in the vehicle
owners manual prior to using this tool. Do not exceed maximum lifting capacity of this engine leveler. This
engine Leveler is intended for automotive use only. Be aware that large or heavy engines may exceed the
stated capacity check vehicle owners manual or contact the engine manufacturer. Do not use for any other
purpose except the supporting of an engine on a suitable lifting device.
Warning
dynamic (load which swings, slips from center or moves quickly) loads can exert a force much
greater than their physical mass (weight) resulting in failure of the Leveler and/or loss of the load leading to
property damage, personnel injury, even death.
UNPACKING AND ASSEMBLING SUPPORT BAR
Unpacking Carton
Place carton in a clear, open area such as garage floor. Remove components and lay them out neatly on
selected work surface. Make sure all nuts, bolts, washers, and pins, are properly assembled, Keep hooks
and L brackets safely until needed.
Supporting an engine using an engine Leveler can be dangerous. This engine Leveler is designed and
intended for use by properly trained and experienced personnel only. If you are not familiar with the
proper and safe operation of an engine support bar, do not use until proper training and knowledge have
been obtained.
The Handle (21) needs to
be positioned on the Load
Leveler before use. To do
this:
a. Remove the
Bolt(19),Nut(20) and
Handle from the Crank(9).
b. Place the handle outside
of the Crank and replace
the Bolt and Nut.
