Testing Handle Pump Operation
Briefly test press operation as follows BEFORE using. Turn release valve clockwise or counter clock wise
allows cylinder to be lowered apply pressure and raised reduce pressure. To lower cylinder twist release
valve clockwise until firm. Do not force or tighten beyond this point. Pump handle a few times to extend
cylinder about halfway. If cylinder does not begin to extend after a few pumps, check to make sure the
release valve is firm. With cylinder extended twist release valve slowly counterclockwise to remove
pressure and raise cylinder. A normal hissing sound may be heard as cylinder rises and pressure in
hydraulic cylinder is released.
OPERATING PRESS
Preparing Work Area
Before using the press, it is important to prepare work area properly. Follow this procedure each time the
press is used to help prevent property damage and or serious injury.
1.) Thoroughly inspect press for damage or wear before each use. Briefly test operation of unloaded press
before using to press any job. If press is damaged or is malfunctioning DO NOT USE until the problem is
corrected.
2.) Consult owner
’s manual for safety precautions correct use and recommended procedures before using
the press. The working load limit of the press is 10000 kg. NEVER EXCEED WORKING LOAD LIMIT
OF PRESS.
3.) Clear children and others from work area before using the press. Another adult should be nearby for
extra safety and assistance but must be clear of press as it is used.
4.) Never use to compress springs or other objects that could be ejected from the press. Do not compress
objects that could shatter.
