Kimex 048-1W Series, Руководство по установке

Страница: 18 / 32

2
Safety instructions
• Do not start assembly until you have read and understood the entire user
manual.
• This product should only be installed by qualified personnel with knowledge
of mechanics and electrical engineering.
• Carry out the installation with a second person for a safe installation.
• Tighten the screws securely, but do not over-tighten them. Too tight
fastening could damage the product.
• This product is designed for indoor use. Outdoor use may cause damage to
the product.
• The stability and load-bearing capacity of supports hanging from the ceiling
should be checked at least twice a year.
Disclaimer
The information in this document is subject to change without notice from the
manufacturer.
Warning
Please read the following instructions carefully and be sure to save them for future
questions. The manufacturer is not responsible for damage to property or personal
injury if the display is used outside of the recommended specifications or if it is
improperly installed.
Do not use this display near heat sources or air conditioning. Do not mount it so
that it is exposed to direct sunlight or in front of a window. Due to the heat-
sensitive PVC surface, it could lead to damage to the projection screen surface.
We recommend that you wait 2 hours after delivery before mounting the screen.
This will allow the screen to become acclimatized, especially if it is installed in a
cold or hot environment.
Please avoid staining the canvas surface. The stains can probably no longer be
removed.